Blinking in Orange : 5 times

Description: No Cartridge/Print head Installed

Related models:
Canon s series: s300,400,450,4500,520,600,820,6300,9000
Canon i series:
i250,255,320,355,450,455,550,560,6100,6500,850,865,905d,950,9100
Canon pixma series:
ip1000,1200,1300,1500,1600,1700,1800,1880,2580,3000,3300,3500,4000,4200,
4500,5200,6000d,6230d,6600d,6700d,ix4000,5000,pro 9000,9500

Summary:
This indicates that printer cannot detect the cartridge in the printer. These are possibilities due to the problem:

• There are no cartridge installed in the printer
• Cartridge error so that the printer cannot detect the cartridge.
• Carriage unit error so there is no communication between cartridge and the printer.
• The last, logic board error so cannot detect the cartridge.

Remedial action:

• Replace cartridge
• Replace carriage unit
• Replace logic board

Read More

Blinking in Orange : 4 times

Description: Low Ink Warning / Ink Runs Out

Related models:
Canon bjc series: bjc3000,6200
Canon s series: s300,400,450,4500,520,600,820,6300,9000
Canon i series:
i250,255,320,355,450,455,550,560,6100,6500,850,865,905d,950,9100
Canon pixma series:
ip1000,1200,1300,1500,1600,1700,1800,1880,2580,3000,3300,3500,4000,4200,
4500,5200,6000d,6230d,6600d,6700d,ix4000,5000,pro 9000,9500

Summary:
The indication shows that low ink warning or ink has run out happens. When the indication appears, press Resume button to continue printing remaining documents. Even tough the indication has shown up, physically some ink still remain in sponge in cartridge.

Remedial action:
Deactivate ink level ink level detection function: In case of using refill ink, the problems will remain due to ink level data is stored in chip memory in the cartridge. You can do this tricks tentatively. Ink level will display to proper point every time you replace the cartridge with new one.
Replace cartridge with new one.

Related posts:
Deactivate ink level detection function

Read More

Blinking in Orange : 3 times

Description: Paper Jam error

Related models:
s series: s300,400,450,4500,520,600,820,6300,9000
i series: i250,255,320,355,450,455,550,560,6100,6500,850,865,905d,950,9100
pixma series:
ip1000,1200,1300,1500,1600,1700,1800,1880,2580,3000,3300,3500,4000,4200,
4500,5200,6000d,6230d,6600d,6700d,ix4000,5000,pro 9000,9500

Summary:
This error indicates that sheet feed unit cannot feed the paper properly, so the paper sensor stay ON. Note that, in some cases, missing of paper sensor spring can make the same indication. For this one, the error preceded by successful printing process.

Remedial action:

• Remove the jam paper, then press RESUME button.
• Replace missing paper sensor spring.

Related posts:
Blinking in Orange 2 times

Read More