Hi guest ,  welcome  |  sign in  |  registered now  |  need help ?

Canon Pixma MX Series: Fax Memory Reception

Written By admin on October 31, 2009 | 4:02 PM

Related Models:
Canon Pixma MX308,MX318,MX700,MX850,MX7600,etc.
"My machine cannot print a fax. The document received in memory instead. at the same time I see the In Use/Memory lamp is lit"
A friend submit the problem on www.fixya.com and request for the solution. Well,now we'll discuss about this topic. When the machine shows message 'Received in Memory' on the LCD and lamp 'In Use/Memory' is lit then it will not be able to print incoming fax document.
This case may happen under one of the following conditions:
  • Ink has run out: Replace the FINE cartridge or ink tank
  • Paper has run out: Load the paper anda press the OK button
  • A different size of paper that specified by page size is loaded: Load the same size of paper as that specified by Page size then press the OK button
  • Page size is set to other than A4,8.5"X11" (LTR) 8.5"X14" (Legal): Set Page size to A4, 8.5"X11" (LTR) 8.5"X14" (Legal)
  • Media type is set to other than Plain paper: Set Media type to Plain paper
  • You pressed the STOP button to cancel printing of a fax: Press the FAX button
  • The machine is not set in FAX mode (but in COPY or SCAN mode): Press the FAX button
Once the problems are resolved as described, the fax document received in memory is printed automatically.

0 comments: